Spring perch bushings

I didn't have to pull the bolt out
I just used backed it out enough so it was flush with nut and out of frame
The nut pushed the bolt out of the bushing as I loosened it, wasn't easy, soaked with kroil overnite then used a floor jack on my ratchet for leverage while wedging open end wrench on the nut against the frame jacked away repeat 30+times until bolt backed out of frame say 1"
then repeat on other side then rotated the perch with tire iron and out she came
took some time but easy way out for this ol fart and about 1 foot clearance, and no lift LOL
I did have the on a wood dolly check out my Q/A thread And thanks to the replies from members got it out in about an hour and only a little sore that nite LOL