Brass exhaust washers

Ok, I got all three pieces for you. The stud, nut and washer. Don't forget those two end studs go through to water......hell, they all might.....I don't remember, but I KNOW the two end ones do, so make sure to coat the stud with a sealer. I always use red high temp RTV because it seals AND keeps the stud from seizing up and breaking off again. Also, it does not need to be very tight. 15 LB FT at the most. Lastly, lube outer threads up with something like anti seize compound. That way everything will come back apart if need be later on down the road. If we don't get to town tomorrow, it'll go out Saturday.....but I am pretty positive we're going to town tomorrow.