D4B Hood Clearance?

The two barrel throttle cable bracket is inboard, and aft, from the mounting hole, think smaller carb. Four barrel throttle cable bracket is outboard, and forward. Also not sure where on intake a DB4 has bolt hole for cable bracket. Should be further forward on a 4 bbl carb, as throttle shaft is forward of center, compared to a two bbl intake. Same throttle cable, so clamp has to move forward.

Less about intake height, and more about how throttle and bellcrank move together.
In addition to the 4 bbl bell crank arm being forward, the hole for the kick down rod is approximately 3-1/4" from the bell crank pivot shaft. The hole for kickdown rod on 2 bbl bell crank is approximately 2-2/4" from bell crank pivot. Since the driven arm on bellcrank is a larger radius for 4 bbl, it has a smaller rotation angle, and does not reach limit of travel, and restrict throttle rotation.

We have Automobilia to attend today; I will try to sketch something out later.