Cast 273 rockers or factory steel rockers budget 360?

I never tried to run the 273 rockers with hydraulic lifters. I have successfully ran stamp steel rockers with a hydraulic cam in my drag car for almost a decade without an issue. I used 2 camshafts during the time period. The Mopar Performance .533 and a Comps .519/.524. Shifted the engine at 6,000 and trapped at 6400. Made prob close to 2,000 passes during that time period without an issue. Was using Eledbrock heads with the springs they come with. Did change them out once for the exact same thing. I have now since swapped to a solid cam and use 273 rockers without an issue. I wouldn't hesitate to use stamped rockers on a mild budget build, just inspect and make sure they aren't worn out and you will be okay.