383 cam advice?
I followed this mantra with a hydraulic roller on my build. 383, 10:1 custom pistons, mild port on the heads, Ferrea valves, 1.6 rockers, performer RPM intake, Holley Sniper injection, CPPA (tti now) 1 3/4 headers. I had a custom cam ground by
http://jonescams.com/ 264/272 seat, 217/225 @ .050 .340 lift at cam .544 at valve, 109 LSA installed 2 degrees advanced. I had very similar numbers on the dyno to the Hot Rod article....
Runs great loads of power and torque, idles well with a distinct lope.
Garth
PS I have this cam that I'll sell if you want it.
Crane Hydraulic Roller Camshafts 689511