67 twin turbo dart
Finally done with the exhaust after a few set back with getting the wrong wrap sent but siliconeintakes is a awesome company swapped it out no problem. Painted the 4" pipe section with engine paint just to protect the welded areas. Wired in the primary fuel pump, with a switch on the ground side so I can have key on and be able to turn the pump off from running. Need some 12ga wire to wire up the second pump. Covered the other coolant passage line on the pass. side. Getting more and more closer. Ordered the coolant overflow tank, just need to see where I can put that to figure where my breather/ oil separator will go.
Finally done with the exhaust after a few set back with getting the wrong wrap sent but siliconeintakes is a awesome company swapped it out no problem. Painted the 4" pipe section with engine paint just to protect the welded areas. Wired in the primary fuel pump, with a switch on the ground side so I can have key on and be able to turn the pump off from running. Need some 12ga wire to wire up the second pump. Covered the other coolant passage line on the pass. side. Getting more and more closer. Ordered the coolant overflow tank, just need to see where I can put that to figure where my breather/ oil separator will go.