71 Dart get 408/ Trick Flow Heads....

Getting back to this Dart.....

I pulled the intake off and the rockers and pushrods out of it....I was not sure of the lifters as i have gotten two sets mixed up....if they were mixed up...these should be new lifters on a used cam....as the other 264/268 destroyed itself during break in which would have had the used lifters from this cam on a new cam....which is a no no..

I removed the lifters and far as I can tell they are new...So to make sure ...I removed them and installed a new set of Howards EDM lifters...I see no marks of any kind on the removed lifters indicating they had been run before.....just wanted to make sure...

Got it mostly back together...did not put the intake back on....not sure about using the SV vs the Victor 340.....SV came in a package deal with another set of heads...Suppose to be ported by Hughes...I know it is gasket matched.....
I have a Victor 340 that Brian at IMM reworked last year....it is on the 360 that is on the Dart now.....have to flip a coin....

So need to confer with driver as whether to swap out and go to Bakersfield or go to Bakersfield with current 360.....