Big horsepower 318 builds

I don't get this notion that a 318 can't be build to a similar hp level as a 340/360. 3.91 vs 4 vs 4.04 were not talking huge difference here a 4 inch bore is considered plenty for building hp a .03"-.06" overbore 318 isn't that far off. I'm sure when going for 600+hp with larger than 2.02 valves it's gonna come into play but somewhat.

Yes when talking drive ability and the need for less gear every 20 cid makes a difference, but this 360 is ok a 340 is a maybe and 318 is no go I think is ridiculous, most people building a stock stroked sbm probably isn't looking to make much more than 400-425hp a lot would be happy with 300-400 hp all 3 could do it, a 273 would be a little trickier but it could also.