Hello calppag,
My kit was missing the complete instructions. It only had the quick start instructions in it, Useless....
You can find them here
https://documents.holley.com/199r11971.pdf
The Fuel routing / regulator / 10 pin is all in the complete instructions..
Just as a note:
Use the little white stylus to interact with the display... Go slow when using the wizard and wait till the screen / computer updates...
Follow the wiring connections as stated in the instructions. No crappy crimps.. No birds nest wiring.. I soldered all my connections and its payed off with no issues to date...
Also buy the laptop cable and download the software for it !!! Well worth the money....
I did a custom in tank pump using a stock tank so no help there in mounting to the frame rail.
And as 76Dart273 said the forums and Holley tech line is of good help... If you call holley have your questions at hand and have pen and paper to copy there answers down..
Also you can follow this post. It will save you time :)
Clean 12v switched source that is hot cranking and running
Use the recommend filters... If you are using A/N fittings on the system you can find the correct filters with A/N fittings on them... I did the whole install using Earls Ultra Pro black hose and A/N fittings. Expensive but well worth the money...
Stay Safe...
Happy Mopar :)
Arron.
View attachment 1715588657
View attachment 1715588658 View attachment 1715588659