Factory screws to mount 69 console?

-
Xgoldfish

Xgoldfish

Well-Known Member
Joined
May 11, 2020
Messages
108
Reaction score
89
Location
Oregon
What do the factory screws look like that mount the console in a 69 Barracuda/Dart? Are the same screws used for the front bracket as the console box? Source for screws? Thank you for any help.
 
Would it also be the same screw used to hold the shifter boot to the floor? Or those do not have a captured washer. Anyone have a picture with length? Thanks guys
 
These are the original screws from my 67.
They are #10

42DD3819-740D-474C-913C-E3CEFAA2C8E5.jpeg

EBE782CC-13FD-417D-A284-F56E9EE42FB1.jpeg

D3D428D8-8A39-4816-80D4-CA093B063878.jpeg

0B1AADEB-B577-4192-AB73-1BDF6702E9E7.jpeg


Alan
 
Thanks for the pics, Alan. Which screw is from the console box and which one is from the front floor bracket? I was thinking the black screw for both. The silver screw is from what area?
 
The black screws go inside the box, the chrome ones go through the carpet in the front on each side.


Alan
 
You must log in or register to reply here.
-

Back
Top