360 value...

yeah, I filled in all the blanks including the reported flow numbers for the head. the rockers are PRW and will have a shim kit, already spoken with B3. If I remember correctly, the spring height was set to 1.8" and are supposed to be good for .575" lift according to the head vendor. I just took a closer peek at the spring specs and for a SFT, I'm going to have to change springs, which is not a problem. What is in there are their HFT version which are probably are not going to get the job done with that solid. There was no spring spec included with his recommendation and I don't think his request form asks for valve details other than diameter. He did spec his EDM lifter.

The HFT version states
Closed ………………….. 115 lbs. @ 1.800”
Open ……………………. 310 lbs. @ 1.225”
.575" lift

The hydraulic roller version they list go
Closed …………………… 145 lbs. @ 1.800”
Open……………………….325 lbs @ 1.200″
.600" lift

I had to hold off ordering the cam because I had to put a bunch of the budget into hidden accident damage repair on the body, so I have some time to reassess the cam and springs with him.