Run electric fans all the time?

CVF says their basic serpentine conversion is 0.92:1 underdrive. No good.

A 3-groove crank pulley (using the outer groove) and a 2-groove a/c WP pulley (using the inner groove) supposedly will line up. Alternator will need remounting. The problem is that the belt will be running very close to the Contour fan shroud since it'll be a lot further forward. So the faster water pump is not proving very practical in the limited A-body space.

I'm going to install a PWM controller and see if I can keep the temps cooler in the first place (no point in letting it get to 198 before the fans come on).