TOO MUCH OIL PRESSURE

I found a way to solve the leaking 90 degree adapter, 1st clean all the surfaces for the large gasket to seal properly, (use instructions supplied with gasket set) then where the big bolt goes through the adapter put 1/2 copper pipe sleeve (about 1/2" long) in there and use the copper or plastic ring seals as mentioned earlier that come in the kit. I found that the hole dripped in the adapter for the bolt is too big and that is where the oil leaks out depending upon where the big bolt ends up (centered or off to one side causing leak) and putting a copper sleeve seals it perfect.