HELP- 1967 Barracuda Commando Valence Measurements

-

FJRdoc

FABO Gold Member
FABO Gold Member
Joined
Dec 29, 2009
Messages
1,266
Reaction score
729
Location
Brownstown, PA
Hi Gang
We're working on my brothers '67 Barracuda notch and have decided to add the hipo exhaust with resonator. I need measurements of the size of the rectangular opening on the driver's side of the valence.
 
Hi Gang
We're working on my brothers '67 Barracuda notch and have decided to add the hipo exhaust with resonator. I need measurements of the size of the rectangular opening on the driver's side of the valence.


Will 69 measurements help? They should! And why just the driver side. Do you already have the opposite?
 
67 273 Commando only in 67. 383-S used down turned tips.
Here is one Barracuda that Ronnie Sox drove. Trimmed as a 68 BO car, but obliviously it is a 67 S.
1967 Barracuda Exhaust.JPG
 
Do you think that the cut out would be the same from 65 to 67? I don't think that the valence panels will interchange.
 
I think the width would be correct, the position on the valance might need to roll down on a 67 VS a 65. Here is a 65. BTW, a 67 Notch S with a 273 is one of my dream cars.
S Rear Valance.jpg
 
Can anybody provide valance measurements on a 1967 Barracuda?
 
What tips are you going for?

I thought 67 were turn down at the valence and or half round Cuts. Please correct me if I am wrong. For rectangular 68/69 style Dual I will gladly give you the measurements.
 
-
Back
Top