What 15" aluminum wheels are you guys running over the 11.75" rotors?
I mounted a tire to a jeep grizzly wheel and screwed a 1.5" wood spacer to it and slipped over the studs for a mock up. I wanted to see how this would look. I've got 1-3/4" space to the leaf spring in the rear and was to far out on the outside as well. I think 1/2" to 3/4" spacer in the rear would be best.
Now for the front the 1.5" spacer is needed to clear the hub grease cap to th inside of the wheel. It clears on the inside bell area of the wheel to the brake caliper. The tire i put on is a little taller than the ones i would transfer over for road use. It appears as though it will clear. In fairness the previous owner trimmed some clearance on the top inner lips of the fenders. Looks about 3/8 - 1/2" missing.
Still unsure if I will move forward and get 3 more wheels. Get a different wheel to taste test. Or what?
Any how check the pics and send opinions.
Thanks.
I mounted a tire to a jeep grizzly wheel and screwed a 1.5" wood spacer to it and slipped over the studs for a mock up. I wanted to see how this would look. I've got 1-3/4" space to the leaf spring in the rear and was to far out on the outside as well. I think 1/2" to 3/4" spacer in the rear would be best.
Now for the front the 1.5" spacer is needed to clear the hub grease cap to th inside of the wheel. It clears on the inside bell area of the wheel to the brake caliper. The tire i put on is a little taller than the ones i would transfer over for road use. It appears as though it will clear. In fairness the previous owner trimmed some clearance on the top inner lips of the fenders. Looks about 3/8 - 1/2" missing.
Still unsure if I will move forward and get 3 more wheels. Get a different wheel to taste test. Or what?
Any how check the pics and send opinions.
Thanks.
