Timing help needed
Edited earlier post where I correctly wrote bleeds then incorrectly wrote IFR while still talking about bleeds. :rolleyes:
What Shrinker suggested for IFR check is similar to Urich-Holley.
shrinker
08-16-2008, 02:41 PM
"Hello; tuning tip; place car in Neutral---start engine---very slowly open throttle by hand or by idle speed screw. Listen very carefully or use a digital tacho for slight increases in RPM for every movement of the throttle blades. If you move the blades the tiniest bit and the engine doesn't increase revs you have a lean spot you need to deal with."
---
The reason for opening the throttle super slowly is to eliminate the pump shot.