Last one to post in this thread wins!

Biff said

Sorry bp , I just copied it from identafix , I would still lean to the ASD relay,because it runs when you jump the coil . Let me know tomorrow

At the coil, the Green/Black wire provides the power from the ASD Relay and the Black/Grey wire goes to the Coil Driver circuit at the Powertrain Control Module (PCM).

Click to expand...

ASD is working. I get a quick little light on the test light on the blue with black tracer when I cycle the ignition. I get continuity from there to the coil. About 30 ohms on the meter. I don't get the quick little light at the coil. Nothing when I crank at the ASD blue / black. Seems like the new pick-up in the dizzy is bad. I'll have to dig deeper into the MAP sensor. Thanks again.