Rebuilt 904 w/ tf2 shifting woes...

DentalDart said
I set the kd line to have the lever pulled all the way back when the throttle is wide open. Then I've been adjusting with the little screws, 1/2 turn at a time giving it more slack.

Yes it does seem like there is a slight delay, thats a good description for it as well.

View attachment 1715612332

Doc I had the same issues when using that Lokar Bracket, it would always creep forward due to it holding only by the one stud and cause soft 1-2 shifts I ended up getting a billet one from Lokar which uses the 2 mounting studs but studs are replaced by cap screws. I still use the bracket even though I switched to manual VB now. That’s coffee spiller mode !