1963 Dodge Dart 270 Convertible for the Wife
Bottom end done! Make sure to degree the cam from Oregon Cams. Called them and it was clear they don’t try to get the alignment pin too close to the grind! Got lucky and only had to jump a tooth (which did not line up correctly to start with) to get it to within 1 degree of the spec sheet sent with the cam. If we had left it at the "best alignment by eye" it would have been 13 degrees advanced! The second photo is the performance hit I would have seen.
Bottom end done! Make sure to degree the cam from Oregon Cams. Called them and it was clear they don’t try to get the alignment pin too close to the grind! Got lucky and only had to jump a tooth (which did not line up correctly to start with) to get it to within 1 degree of the spec sheet sent with the cam. If we had left it at the "best alignment by eye" it would have been 13 degrees advanced! The second photo is the performance hit I would have seen.