360/410 Stroker Questions

Getting back to this engine...been trying to decide what cam to put in it....

Trying to use something I already have.....OK...MP557 cam.......got a few MP cams...and a few are not marked...so i measure one that and I got .557....the second try...ok

put in it....advanced it 4 degrees...and I get 104,,,,,figued it should be 106....ok.......check lift at the cam...and multiply by 1.5......bingo.....590,,,,,,LOL

well...so much for that....gotta go back to the pile again....lol