Super Six install on 1974 Dart
I applied some fiberglas with epoxy resin to the inside of the air cleaner lid. At first the glass mat didn't want to follow the contours of the lid, so I tried with smaller pieces of mat and that worked better. I forgot how fast the epoxy sets up if you have a decent amount of it in a cup. The more you have, the hotter it gets and the quicker it sets. The small amounts on the lid took several hours to cure. I also patched the hole in the bottom of the air cleaner base, and I went ahead and patched the hole for the OSAC too.
Before applying epoxy, I wire-wheeled the areas and wiped with acetone.
I applied some fiberglas with epoxy resin to the inside of the air cleaner lid. At first the glass mat didn't want to follow the contours of the lid, so I tried with smaller pieces of mat and that worked better. I forgot how fast the epoxy sets up if you have a decent amount of it in a cup. The more you have, the hotter it gets and the quicker it sets. The small amounts on the lid took several hours to cure. I also patched the hole in the bottom of the air cleaner base, and I went ahead and patched the hole for the OSAC too.
Before applying epoxy, I wire-wheeled the areas and wiped with acetone.
