833 Transmission won't disengage at stop after 100 miles.
Moved the inboard arm of the Z bar toward the bellhousing and braced it. It occurred to me the arm probably bent because of the bad angle between the Z bar arm and clutch fork. The Z bar arm does clear the exhaust pipe now and the angle looks a lot better. Also used offset alignment pins on the bellhousing to achieve 0.004" runout. Factory Service Manual states a max of 0.008"
Moved the inboard arm of the Z bar toward the bellhousing and braced it. It occurred to me the arm probably bent because of the bad angle between the Z bar arm and clutch fork. The Z bar arm does clear the exhaust pipe now and the angle looks a lot better. Also used offset alignment pins on the bellhousing to achieve 0.004" runout. Factory Service Manual states a max of 0.008"