Spare parts single 318 turbo build

You got the same MS2 if you got the MS1 with the upgraded daughterboard, just like mine. 4X the fuel map resolution and autotune ability over MS1 if you buy tuner-studio license. My manifold is my sheetmetal intake I made.
Pishta's sheet metal intake
Gonna have to be bank fired as MS2 only has 2 injector channels....? I got a smaller turbo but no waste gate. The HX35 has an honest 2 9/16 exducer and a 14cm3 housing on it (has 14 cast into hot side, no 12 to be seen). I had a larger one but I sold it 2 weeks ago to an LS guy for #2 on his build.
Early boost is fine by me as it has 2.92 or 3.23 gears in it, Cant remember as its been a while since I been in there. I have a welded internal brace that ties the top platet to the bottom as 10 psi boost will generate a huge amount of force on that welded top plate, at 112 square inches. May have to set the limit at 10, not sure what 1/8 welded plate can handle.