1974 Brain Box saves the day.

I built a mount like post 80 for mine, but I added a trough at the bottom.

Instead of a step design, I used 1/4" spacers to come out from the firewall.

It has already saved the fresh paint on my firewall by catching a bit of goo that oozed out of the ECM.

My mount also uses the factory ECM mount points, not a wider pattern like the E body/post 80 mount.



On another note- I have a working, vintage ECM that lost it's goo (potting) sitting on the shelf.

Can I just seal it against moisture with anything or are there special requirements?

It has been my experience that once most of the goo comes out the ECM is not long for the world.