Current options on multipurpose lifters?

LovetheA's said

Thank everyone for all the info. Please give me a couple more suggestions so I can choose.
I think I get it now. You should only use lifters with the cam it has been broken in with. However, new lifters can be broken in to that same older cam over and over.
Apparently the integrity of the used cam isn’t the issue when adapting to a new set of lifters. The new lifters each time brake in to the set wear pattern of the cam? Is that correct?

Click to expand...

You can use new lifters on a used cam, but not used lifters on a new cam. I wouldn't use used lifters on a matched cam even if they were marked for the corresponding lobe they came off of. New lifters are pretty cheap. Once lifters have been run on a cam, they establish a matching wear pattern with that lobe. You can put new lifters on a used cam, as long as you go through the camshaft break in process all over again. Does that clear it up?

What more "suggestions" do you want? More lifter suggestions? Those Lunati Mocro Trols are the best on the market. If you don't take my word for it, then just buy some 69.99 Melling lifters and run them.