Over budget 318 build

Glad to see someone not afraid of a stock stroke 318 build. It'll scream. You are aware of the required KB ring gaps, right? Failure to follow those will have really bad results. I always file them a tick on the large side for extra protection. Won't hurt a thing.

So that is where I’m at right now. According to the paper that came with the pistons, using their ring gap factor, my ring gap should be .03152. (3.94x.0080). Now the paper says a 4.000 bore which obviously mine is smaller so I’m thinking a .030 should do the trick. What do you think?
Also I put the ring in the bore to test out the feeler gauge. I got .018 is the gap right now for the #1 bore. .019 will not fit in the gap. So I’ll have to grind and test the gap to get it to .030. Or should it be smaller than that?

BC9CF0C0-4EDB-43BC-99FB-D2C235D2BE71.jpeg

B6230D53-8A92-4469-A557-F2E9E48AFA20.jpeg

599998F2-D55B-4BDA-82F0-5A8253B3BE5D.jpeg