67/68/69 cuda dilemma
Trans pan came in. This thing is is nice. I also picked up some 14 gage 2x3 to redo the subframe connectors and make the new lower radiator support.
Been busy though for the last few days chasing a dead short in the turn signal wiring in my truck. Needed it all working so I could go pick up this steel. Hint it wasnt a bad switch in the column. It was actually shorted directly to ground between the output side of the fuse to the flasher relay.
I had a big pile of wiring from the 92 dakota I scrapped. I used that in the same color codes, shrink tube, and a bunch of spade connectors to make a temporary wire around the problem which is definitely inside the cab, but i will go looking for the shorted wire eventually. Reverse lights are on the same turn signal circuit that I wired around so i have no reverse lights, but at least I have turn signals now. This is a temp fix, but in my world it will probably end up staying a temp fix for the next 10 years.
Trans pan came in. This thing is is nice. I also picked up some 14 gage 2x3 to redo the subframe connectors and make the new lower radiator support.
Been busy though for the last few days chasing a dead short in the turn signal wiring in my truck. Needed it all working so I could go pick up this steel. Hint it wasnt a bad switch in the column. It was actually shorted directly to ground between the output side of the fuse to the flasher relay.
I had a big pile of wiring from the 92 dakota I scrapped. I used that in the same color codes, shrink tube, and a bunch of spade connectors to make a temporary wire around the problem which is definitely inside the cab, but i will go looking for the shorted wire eventually. Reverse lights are on the same turn signal circuit that I wired around so i have no reverse lights, but at least I have turn signals now. This is a temp fix, but in my world it will probably end up staying a temp fix for the next 10 years.