[SOLD] Small Block H Beam Connecting Rods - New

-
Status
Not open for further replies.
R

Rocket

FABO Gold Member
FABO Gold Member
Joined
Apr 22, 2005
Messages
2,821
Reaction score
846
Location
U.S.A.
Rating - 100%
136   0   0
Contact seller
I have a set of 8 new Speedmaster H Beam connecting rods part number nart number:pCE274.1047. Specs are below. Note these us a small block Chevy wrist pin size of 0.927”. Speedmasters description on their site as well as other retailers lists these rods as have a SBM wrist pin size which is incorrect. I corrected this in the specs below.

Connecting Rod Length Center to Center (in): 6.123 in.
Connecting Rod Beam Style: H-beam Street/Strip
Connecting Rod Material: 4340 Chromoly Steel
Connecting Rod Finish: Shot-peened
Wrist Pin Style: Floating
Cap Retention Style: Through-bolt
Connecting Rod Bolt Brand: PCE
Connecting Rod Bolt Diameter: 7/16 in.
Connecting Rod Bolt Material: Chromoly steel
Fastener Yield Strength (psi): 200,000 psi
Connecting Rod Bolt Head Style: 12-point
Rod Journal Diameter (in): 2.125 in.
Pin End Bore Diameter (in): 0.927 in.
Advertised Horsepower Rating (hp): 700 hp
Advertised RPM Rating: 7,500 rpm
Weight Matched Set: Yes

Speedmaster sells these for $272. I will sell these new rods for $220 shipped.

PM me with questions

H Beam 6.123 2.125 .984 Bronze Bush 4340 Connecting Rods Chrysler 318 340 360

P1060604.JPG
P1060605.JPG
P1060606.JPG
P1060607.JPG
P1060608.JPG
P1060609.JPG
 
The Speedmaster information on their site is wrong as mentioned in my description above. I have repeated the comment again below so everyone has the right information.

“Note these us a small blockChevy wrist pin size of 0.927”. Speedmasters description on their site as well as other retailers lists these rods as have a SBM wrist pin size which is incorrect.”
 
Status
Not open for further replies.
-

Back
Top