Dartin for Divorce

Checked my oil to make sure I didn't blow a head gasket or get any coolant in the oil.... sure enough... looks just as clean as when I put it in lol. Just a little low from a leaky drain plug... I need a new one. Also after having a 2nd run in with antifreeze last night from one of the hose clamps not being tight enough, I tightened it up and no more antifreeze leaks.

Then adjusted my idle back down to 800ish, set the idle mixture screws on the carb back to factory settings because I probably messed the mixture up at some point since Aarcuda set it. Then I checked the vacuum, its about 14-15 mmhg.

I also double and triple checked my kd cable and throttle cable. Both are where they should be. Then I went counter clockwise 1/2 turn on the secondary flap because I've been getting a bog going from partial throttle to WOT.

- Picture of vacuum was from before I put the idle mixture back at factory settings.

Now its time to do a little test driving.