Location for oil holes on rocker arms?

DrEamer said

Looks like they may have listened to you. I took off the rockers to see if they may have routed the holes as in Rockets picture. Upon removing the rocker I found a hole drilled on the bottom (pictured below). It is fairly small, but I took a can of WD40 with the red tube attached and was able to see fluid pass through it. I will confirm with PRW that spraying the spring is the intent, but I can't imaging it being for anything else.

View attachment 1715662931

Click to expand...

LOL...those PRICKS. That’s exactly where the hole should be. It lubes the springs just like it should. Everything else will get plenty of oil from the splash.

That just chaps my ***. I’m going to call them tomorrow and see if they will replace them. That oil hole on top is STUPID. And I don’t feel like drilling 16 holes.

Edit: they have that hole up high enough so that it will oil the roller too. Wow. The engineer I talked to several years ago was adamant the hole was in the right location and I was an idiot.