1969 Dodge Dart Swinger clean up
5 parts Flat to 2 parts Gloss... hopefully = Semi-Gloss
Dipped the two sway bar brackets.
You don't miss any spots this way. I let it drip off in one direction and then hung the parts by the other mounting hole to level out the runs.
Into that 5 + 2 mix I then added a 1/2 of Turpentine to thin for spraying. A 1/4 to a 1/3rd may have been better as it thinned a bit more than I wanted.
Broke out my trusty 35 year old Wagner! Painted a car with one of these in 1978 ! The big '69 Fury II boat..
Why I can never have one of those "pretty" shop floors! Gun worked really good and I simulated those factory runs perfectly!
Sealing up the container with over 1/2 the paint I mixed up still remaining, so I can use it for the rear axle assembly later.
No memory required and that's a good thing these days.
Rolled the K frame out to the "bake oven". Almost dumped everything when I added the sway bar and transmission mount, as the legs are not out on the hoist!
Paint on full bake now..
5 parts Flat to 2 parts Gloss... hopefully = Semi-Gloss
Dipped the two sway bar brackets.
You don't miss any spots this way. I let it drip off in one direction and then hung the parts by the other mounting hole to level out the runs.
Into that 5 + 2 mix I then added a 1/2 of Turpentine to thin for spraying. A 1/4 to a 1/3rd may have been better as it thinned a bit more than I wanted.
Broke out my trusty 35 year old Wagner! Painted a car with one of these in 1978 ! The big '69 Fury II boat..
Why I can never have one of those "pretty" shop floors! Gun worked really good and I simulated those factory runs perfectly!
Sealing up the container with over 1/2 the paint I mixed up still remaining, so I can use it for the rear axle assembly later.
No memory required and that's a good thing these days.
Rolled the K frame out to the "bake oven". Almost dumped everything when I added the sway bar and transmission mount, as the legs are not out on the hoist!
Paint on full bake now..