Thank you for the reply and also pointing that out for me on where to post my request for these parts. I went ahead and posted on the "parts wanted." I am also looking forward to learning more about the 69 Barracuda as this is my first one building. I am sure I will have many questions a long the way. Currently the car is an assembled shell sitting on a cart. All of the body work has been done and 2 coats of primer has been applied and blocked. Reason I am assembling the body before paint is to make certain everything fits, lines up and works before painting. Thus why we are ISO door lock mech pieces. I plan to assemble the body minus the front and rear glass before I start the prep stage for paint. This car wasn't to terribly rusty but had quite a bit of body damage. I had to do a trunk floor, right side quarter, rust spots on the lower quarters on the left side, make a '68 driver side door into a '69 door (reason why we need all of the lock linkage.) replace the right side rocker, right side A and B pillars as well; Yea, huh! What a HUGE job this has been and a bit of fun in the process. I will do up a build thread soon. Thanks again for chiming in. Eric in Utah.