Crosswind air gap clone and ram truck serpentine setup
Ok got a few pics my compressor doesn’t have the extra mounting hole. My plan was to leave a little of the one I cut down and then make a bracket from that to somewhere else on the front bracket. However I will probably just get a new compressor with the extra bolt hole and do as 75slant6 described. Also the upper radiator hose is kind of at a odd angle with the thermostat housing being pointed to passenger side. I plan on taking the truck to the local parts store and looking through all the hose to find one that works without having a splice in it like the current one.
Ok got a few pics my compressor doesn’t have the extra mounting hole. My plan was to leave a little of the one I cut down and then make a bracket from that to somewhere else on the front bracket. However I will probably just get a new compressor with the extra bolt hole and do as 75slant6 described. Also the upper radiator hose is kind of at a odd angle with the thermostat housing being pointed to passenger side. I plan on taking the truck to the local parts store and looking through all the hose to find one that works without having a splice in it like the current one.
