My Dart Swinger Project!

JDMopar said
Check to make sure your fender top signal indicators are plugged in under the fenders, and plug your headlight bulbs in. Don't know if the headlights will prevent the turn signals from working, but it's worth a shot. Also, if your negative battery cable has the pigtail that bolts to the radiator support, that shiny new paint may be preventing the grounds from making connection. Check to see if you have both high and low beams when you plug in the headlights, to rule out that the dimmer switch may have sat there and gone bad, and last but not least....check to see if the blinker is bad or got robbed from under the dash when you weren't looking! :eek: Keep a plugging, and before long, as @HemiDenny says....it will go WOOMPA!!! :D

The fender indacaters are plugged in I checked that one. I only have one headlight hooked up for testing purposes I didn't even think about that I will plug the other side up. I did take and sand around the hole all the way to the bare metal on my new shiny paint (that hurt a lot im not gonna lie) I got the one from the battery and the one from the harness mounted there at the rad support am I missing another ground or is there only 2? I checked the blinker and it's there and it's clicking with the Hazzards, it may be a little low on fluid but I'm assuming since it's clicking its good! Hahaha here is my ground connection let me know if you think I missed something