Will the modern Mopar vehicles' manual transmissions bolt up to LA engines?

The bellhousing from QuickTime # RM8074 has a depth of 6.465" to fit the T-56 to a small block Mopar. The bellhousing for the new gen Hemi's RM-8081 have a 7.339" depth to fit the TR6060 which has a longer input shaft to make up for the 8 bolt dual mas thicker flywheel and dual disc clutch, which will not bolt up to the LA 6 bolt crank. The RM-8081 bellhousing will bolt up, but the starter will be on the wrong side and you will have to figure out a way to space the flywheel and clutch out to meet up with the hydraulic throwout bearing. I don't think the input shaft bearing retainer is long enough to space the throwout bearing out far enough with an LA clutch.