1964 Valiant "Get Runnin & Drivin"
As promised, here is what I did to raise the front sway bar. As designed, the Addco hardware kit leaves a lot to be desired. Especially when you install the bar as per the instructions. The 90 degree brackets hang down off the bottom of the K frame ready to bottom out on bumps or take out small animals. So all I did was drill a few new holes and relocate the 90 brackets to the top of the K frame and bolted it all back together. Sounds easy but it was a pain in the dick for this old dude with no lift layin on the ground but here it is. The brackets look crooked in comparison but they're not. The K frame is a little higher on the driver's side, so it makes the bracket look lower. But as promised, I got it above the valence to K frame bracket.
As promised, here is what I did to raise the front sway bar. As designed, the Addco hardware kit leaves a lot to be desired. Especially when you install the bar as per the instructions. The 90 degree brackets hang down off the bottom of the K frame ready to bottom out on bumps or take out small animals. So all I did was drill a few new holes and relocate the 90 brackets to the top of the K frame and bolted it all back together. Sounds easy but it was a pain in the dick for this old dude with no lift layin on the ground but here it is. The brackets look crooked in comparison but they're not. The K frame is a little higher on the driver's side, so it makes the bracket look lower. But as promised, I got it above the valence to K frame bracket.
