1969 Dodge Dart Swinger clean up
Already had it unbolted, so may as well clean up the transmission dip stick tube and install a new O ring. Common leak point.
Transfer of custody, from gantry to engine hoist.
Looking spiffy and closer to going back on the K frame.
Engine in the vicinity of the paint "bake oven" and set to high...
It's the rocker covers turn in the blasting cabinet.
Hours later.. thanks to 3 layers of paint. Also blasted the OE leaf spring hanger bolts and the new rear hangers. I always like to weld on clean metal.
Need to make some new wiring tabs. One for the end by the alternator.
And need 2 new tabs on the side of the cover. Tomorrows work hopefully.