Help with LED halo lights

For almost every Mopar electrical issue, grounds are usually an issue.
The 3 prongs for the headlight are hi, low and ground. Be sure to have the ground prong connected when testing the halo lights.
I recently installed a similar set up on a friend's 71 truck.
I wired the white halo to the running light wire on his stock running light/turn signal and the turn light wire to the turn signal wire for that side.
In this way, to use the halos only he only pulled the headlight switch knob out to the first click lighting the stock running lights and the halos.
To run halos and headlights, 2 clicks.
When the turn signals were activated, his stock signals flashed as well as the orange part of the halos.