Another Cold Case radiator install
The moment of truth, after measuring to be sure the clearances are good for the 10th time, is the fan install. This is where you can really do some damage to the radiator fins.
I was sure to use the water pump to fan clutch bushing that came with the 2947 clutch to ensure that nice tight fit.
I’ve got the MP 5 blade fan so I believe it may be easier to install than 7 blade fans due to the distance between the blades. This allowed me to roll the fan into the shroud with little to no contact on the radiator fins. The few that were rolled a bit I easily straightened with a pick.