1969 Dodge Dart Swinger clean up
Rolling jack set for width and lowered into place. Heavy duty jack tray for the other end that I can use a bottle jack in, 4 drip trays, etc. Put the post lifters in place and rolled the entire assembly with one hand towards the doors, so the ramps are just to the edge of my floor cement with the door open and all that was left to do was load her up! I've got 9" above the roof with the wing 2" from the ceiling and can JUST get the Bee underneath with a 1/2 to spare. Next up, cutting a rectangle into the ceiling between trusses so I can gain another 8 1/2" of lift height. Lift deck plates are the EXACT width of B bodies!!! Don't try to load a car with Polyglass tires covered in snow! Lastly I turned on the bunk beds mood lights, hoping for something else to appear ... :rolleyes: Back to the Dart shortly...
Rolling jack set for width and lowered into place. Heavy duty jack tray for the other end that I can use a bottle jack in, 4 drip trays, etc. Put the post lifters in place and rolled the entire assembly with one hand towards the doors, so the ramps are just to the edge of my floor cement with the door open and all that was left to do was load her up! I've got 9" above the roof with the wing 2" from the ceiling and can JUST get the Bee underneath with a 1/2 to spare. Next up, cutting a rectangle into the ceiling between trusses so I can gain another 8 1/2" of lift height. Lift deck plates are the EXACT width of B bodies!!! Don't try to load a car with Polyglass tires covered in snow! Lastly I turned on the bunk beds mood lights, hoping for something else to appear ... :rolleyes: Back to the Dart shortly...