Solid lifter / Hydrualic Cam

I wasn’t referring to your situation in particular.
More of a general viewpoint.
If you’re going to use solid lifters anyway, just get the cam to go with them from the start.

In your situation, it’s somewhat of an experiment.
Just keep in mind 1/2 of what you’re doing when you’re breaking in the cam is breaking in the lifters....... so, if you try the new solids..... you should sort of treat it as a new cam.

The main issue with the hyd lifters on the XE/HL cams is, in many(most?) cases the motor won’t have peaked yet at the point where the lifters decide to start acting up, so people end up running the motors well into the range where the lifter unhappiness is going on.

That’s one series of lobes where unless you’re very disciplined about keeping the rpm in check....... solid lifters are the better option.

But, my point earlier was........ if you’re making decisions about the combo in the beginning, and this is a crossroads you’re at....... just get the solid cam to go with the solid lifters.