Dyno #'s with Trickflow Heads

I would love to put my 96 dakota sport on a chassie Dyno, to see what its putting to the ground. I have a 2000 360 magnum thats pretty much stock, stock bore block, stock rods and stock crank, except the pistons. Have the KB107 pistons. Has a comp 550 lift sold cam. I think its 260 at 0.050 and is 594 lift with 1.6 roller rockers. Out of the box Trick flow heads. Indy single plane intake. Holley 800DP carb, hooker 1-5/8 headers. 904 transmission, 8 inch 5600 stall. 430 gears , 28x9x15 slicks. I am guessing the dakota weighes 3400 with me in it. Best pass so far has been a spinning 11.24 at 116 in the 1/4 and 7.15 at 96 in the 1/8. I need to send the converter off and get it redone for my set up. I think the truck has some low 11 in it. I think my best 60 foot was a 1.53. I havent got to do much tuning on the caltracs yet. I am right at 11.1 compression and race it on 93 pump gas. I havent decide yet if I am going to build a magnum based 426 with 13.5.1 compression and my trickflow heads or build a 13.5.1 5.7 hemi stroked to 392. I have everything to build the magnum 426 except the stroker kit. The hemi I only have a set of pistons and a set of eagle heads. Man decisions decisions lol