Welding machine help needed Hobart
The stinger cable plugs into the machine. There is a thumbscrew (large wingnut) that holds the stinger into the machine. Sometimes the wire will break between the roller and the stinger tube. If you loosen the thumb screw and pull out the stinger you can clear out any wire that had bundled up in there. Make sure machine is off and unplugged. You need to unscrew the thumbscrew quite a bit before the stinger cable will come out and don't forget to unplug the stinger electrical connector.
The stinger cable plugs into the machine. There is a thumbscrew (large wingnut) that holds the stinger into the machine. Sometimes the wire will break between the roller and the stinger tube. If you loosen the thumb screw and pull out the stinger you can clear out any wire that had bundled up in there. Make sure machine is off and unplugged. You need to unscrew the thumbscrew quite a bit before the stinger cable will come out and don't forget to unplug the stinger electrical connector.
