18x9.5 +12

Gotcha. Sounds like the hubs that Cass sells aren't a direct swap for the one's Andy used then. Good to know.



I wonder if that was the other (only?) reason Andy pushed the face of the hub out some? So the tie-rod would clear.

So far I am ok with my 17x8's and +24mm offset, but not by much. If I want to go to a 275 (someday) on the front, probably going to have to step up to an 18" wheel.

I had the same wheels and tires on with an 11.75" setup but I had to use a 5 or 10mm spacer (I can't remember honestly) so the wheels wouldn't hit the hotchkis control arms at full droop with the wheels turned. With the Dr Diff 13", everything clears, but let's be honest it's still not a lot of space.

Fresh picture from the garage today. Closest point is about a 1/2" clearance or so. Not a chance on a 17" wheel.
MzfAbh_t5FdMwtNMHag9WzL7iowuTM3GtcF24SKveI-_pwYP6QNXJp-l5yoFLq1Dhnh9n7c=w1250-h937-no?authuser=1.jpg
v_Am-owvCppSB6VmjZyqnjzSwfrAgem7zvwlbOynnRhmJ_I_XPaydaQBEgHADl3lNyJ7ouJc=w703-h937-no?authuser=1.jpg