In need of a engine measurment

Pish gave the correct answer,..for an early A, but the '67 & up A's have the eng & trans between 1.5&2.0" further behind the frt wheels. So figure 6",...that is why headers often don't fit early A's, the front is ~2.5" narrower(T-bars, steer gear), & the "hole" for tubes has the pitman arm/centerlink backed into it by almost 2". You're not going to be able to use a rear-sump on anything but a tk/van, unless You build a pass-thru tube for the CL, or swap to frt.-mt. steering. Are there no auto mid-sump pans & pickups to fit that 4.0? Not that well versed in AMC, older 258 pans from concord/eagle/etc.?