Transmission Cooler/Cooler lines
For the cooler mounting i used what i had on hand it's about 1/2" square thin wall tube, I used nutserts into the tube to secure both coolers and to body, cooler lines are 3/8 nickel copper and a bit of rubber line at the coolers to allow for movement, the hardline passes through the radiator support via speedflow Bulkhead fittings then all hardline from rad back to trans.
For the cooler mounting i used what i had on hand it's about 1/2" square thin wall tube, I used nutserts into the tube to secure both coolers and to body, cooler lines are 3/8 nickel copper and a bit of rubber line at the coolers to allow for movement, the hardline passes through the radiator support via speedflow Bulkhead fittings then all hardline from rad back to trans.
