Jacks....bumper, floor, scissor on Driver
I much prefer the Monte Carlo jack. Never wanted to mess up my Barracuda with the factory jack. There are factory holes on the bottom on the front and rear frame rails. I welded a short round piece of pipe to the jack to fit inside the factory holes in the frame rails. The Monte Carlo jack raises the car by the frame rails so that you don't have to raise the car so high in the air like when you use the factory jack. Because factory jack lifts from the bumper it has to lift the car pretty high to get the tires off the ground. This is unsafe!! I would of course have tire chocks for safety. I usually find them at swap meets for $25-$35. This jack lifts the car very easily and is much easier to use than a scissor jack and causes no damage like a factory jack. Also, it won't leak like a hydraulic jack. 1984 1985 1986 1987 regal cutlass monte carlo
I much prefer the Monte Carlo jack. Never wanted to mess up my Barracuda with the factory jack. There are factory holes on the bottom on the front and rear frame rails. I welded a short round piece of pipe to the jack to fit inside the factory holes in the frame rails. The Monte Carlo jack raises the car by the frame rails so that you don't have to raise the car so high in the air like when you use the factory jack. Because factory jack lifts from the bumper it has to lift the car pretty high to get the tires off the ground. This is unsafe!! I would of course have tire chocks for safety. I usually find them at swap meets for $25-$35. This jack lifts the car very easily and is much easier to use than a scissor jack and causes no damage like a factory jack. Also, it won't leak like a hydraulic jack. 1984 1985 1986 1987 regal cutlass monte carlo