I much prefer the Monte Carlo jack. Never wanted to mess up my Barracuda with the factory jack. There are factory holes on the bottom on the front and rear frame rails. I welded a short round piece of pipe to the jack to fit inside the factory holes in the frame rails. The Monte Carlo jack raises the car by the frame rails so that you don't have to raise the car so high in the air like when you use the factory jack. The factory jack has to lift the car and get past all the suspension before the tires get off the ground. This is unsafe!! I would of course have tire chocks for safety. I usually find them at swap meets for $25-$35. This jack lifts the car very easily and is much easier to use than a scissor jack and causes no damage like a factory jack. Also, it won't leak like a hydraulic jack.
View attachment 1715697074