Bob's Component Resto Part 12: Factory Cruise Control
I got around to doing some more troubleshooting and parts replacing on my wife's Duster 360 today which included replacing the upper cable because I broke the end while removing the instrument cluster a few weeks ago.
The Upper cable measured out at 33.5" for and was a Stewart Warner cable with P/N: 3593284
The speedometer turns when I manually spin the cable from the end disconnected from the cruise control module. My next step is to pull the lower cable off the transmission and spin it from there. If It spins I'll then pull the drive gear and check that.
I replaced the cable with ATP Y-890 It was the closest to length I could find on their website that had the correct ends.
ATP Automotive Y-890 Speedometer Cable
I got around to doing some more troubleshooting and parts replacing on my wife's Duster 360 today which included replacing the upper cable because I broke the end while removing the instrument cluster a few weeks ago.
The Upper cable measured out at 33.5" for and was a Stewart Warner cable with P/N: 3593284
The speedometer turns when I manually spin the cable from the end disconnected from the cruise control module. My next step is to pull the lower cable off the transmission and spin it from there. If It spins I'll then pull the drive gear and check that.
I replaced the cable with ATP Y-890 It was the closest to length I could find on their website that had the correct ends.
ATP Automotive Y-890 Speedometer Cable
