69 barracuda wiring questions

CRUZE 418 said
#11, not with that wire end, there is a plug right there in the picture where the oil pressure sending unit goes..
#1, part of the harness from trans sending unit, the spade plugs into a blank space in firewall main bulkhead, and the underdash reverse lamp to that. The short two wire that plugs into the top of the wiper harness is missing.

Your right. Tan wire doesn't have the correct terminal to go to coil. It doesn't have the correct terminal for oil pressure sender either. Oil sender wire is gray in every model schematic I've looked at be it to a gauge or warning lamp. Good luck to all